 Zebra 2824 label printer  Side of the Zebra 2842 printer. On the bottom twoards the back is the power switch for the printer. To open the printer pull the two green tabs on both sides of the printer forward.  Error light for the Zebra 2824  Zebra 2824 internal  Correct way to load labels. Make sure that the labels come off the top of the roll twoards the front of the printer.  Rear of the Zebra 2824, should be two cables, one USB and one power.  Serial number and information label on the bottom of the printer.  Power cable for the printer. It does break away at the brick for easier power cycle.  Users can pull the power cable from the brick. |
|
|